Upside Down Chimney Sweeps logo
Call

Arlington, MA · Middlesex County

Storm Damaged Chimney in Arlington, MA

Cracked crowns, spalling brick, failed flashing, damaged flue tiles - we trace every chimney problem to its root cause and repair it properly, so you fix it once instead of chasing symptoms every spring. Most targeted chimney repairs in the Boston market run $400–$1,800 depending on access and scope, with crown and flashing work typically landing between $600 and $1,400 - we confirm exact numbers in a written estimate before any work begins.

Call (781) 653-5644

A typical call to our shop starts a lot like your search for "storm damaged chimney". A homeowner describes a symptom, often apologetically, unsure whether it is a real problem or something every chimney does. Our answer is almost always the same: chimneys do not develop symptoms for no reason, and the symptom you can see usually points to a cause you cannot. Upside Down Chimney Sweeps has been climbing ladders in and around Melrose long enough to know which noises, smells, stains, and drafts matter, and which just need a minor adjustment. In the sections below, we will walk through the likely causes behind your search, the way a professional confirms the real one, and what fixing it properly involves. When you are ready for eyes on your chimney, call (781) 653-5644.

Massachusetts homes are old — genuinely old, not real-estate-listing old. Triple-deckers from the 1890s, Victorians with three flues in one stack, postwar capes with hastily added fireplaces: each era brought its own construction habits, and many predate flue liners entirely. An unlined or deteriorated flue lets heat and gases reach parts of the house they were never meant to touch. That is why this issue deserves more attention in a Massachusetts home than the same symptom might get in a newer build elsewhere. The original masons did excellent work with the materials of their time, but no chimney was designed to go a century without attention, and most around Greater Boston have outlived their builders by decades. Understanding your chimney's era is the first step toward understanding what is going wrong with it.

The stakes with chimney problems are not hypothetical. A chimney's core function is containment: keeping flue gases, sparks, and extreme heat inside a sealed passage until they exit above the roof. Carbon monoxide is odorless and colorless, and a blocked or leaking flue can push it back into living space instead of venting it outside. Meanwhile, creosote — the tar-like residue wood smoke deposits inside the flue — is fuel waiting for an ignition source, and chimney fires often burn unnoticed until they have damaged the liner or spread toward framing. This is why both NFPA 211 and CSIA guidance treat annual inspection as a baseline, not an upsell. Most chimney issues are discovered during a routine visit, long before they become emergencies. The dangerous ones are almost always the ones nobody was looking at.

Chimney Repair in Arlington, MA

The housing stock around Greater Boston makes chimney repair its own specialty. A large share of the homes we service were built between the 1880s and the 1950s, with soft lime-based mortar, unlined or clay-tile flues, and chimneys that have already outlived several roofs. Many of these flues were later converted from coal or oil to gas, and the cooler, wetter gas exhaust condenses inside an oversized masonry flue, forming acidic moisture that quietly eats mortar joints and tile from the inside out. Add coastal salt air east of Route 1 and the aggressive freeze-thaw swings we get inland, and you have chimneys that need a technician who understands old New England masonry, not just a tube of caulk.

No part of your house takes a harder beating than the chimney. It stands above the roofline in every nor'easter, catches wind-driven rain from all four sides, bakes in July sun, and then rides out forty-plus freeze-thaw cycles between November and April. Masonry is porous by nature: brick and mortar drink in water, and when that water freezes it expands roughly nine percent, wedging apart hairline cracks a little further with every cycle. That is why a chimney in Arlington that looked fine in September can show open mortar joints and flaking brick faces by the time the snow melts. Chimney damage is rarely sudden - it is cumulative, mechanical, and completely predictable once you know where to look.

Upside Down Chimney Sweeps is based at 20 Sewall Street in Melrose, and we repair chimneys across Arlington and the surrounding towns every week of the year. Our repair work starts with diagnosis, not guesswork: we follow NFPA 211 inspection practice, run a camera up the flue when the evidence calls for it, and document what we find with photos you can actually see. Then we explain the failure mechanism in plain language, give you a written scope and price, and fix the cause rather than smearing sealant over the symptom. If your chimney is leaking, shedding brick, or drafting poorly, call (781) 653-5644 and we will get eyes on it quickly.

What the Service Includes

1Crown Repair and Recasting

The crown sheds water away from the chimney core, and when it cracks, everything below it gets wet. For minor crazing we clean, fill, and coat the crown with a flexible elastomeric crown sealant that stays waterproof through freeze-thaw movement. For crowns that are broken, undersized, or poured flat with no overhang, we cast a proper new crown in concrete: sloped to shed water, projecting past the brick with a drip edge, and isolated from the flue tiles with a bond-break expansion joint so thermal movement cannot crack it again.

2Flashing Repair and Counter-Flashing

Flashing failures cause more "mystery leaks" than any other chimney defect, and they are often misdiagnosed as roof problems. We rebuild the system the correct way: step flashing woven into each shingle course against the chimney, then counter-flashing cut into a reglet ground into the mortar joints and lapped down over the steps. Water running down the brick face passes over metal, never behind it. On wide chimneys on the low side of a roof, we can also add a cricket to divert water and snow load around the stack.

3Spalling Brick Replacement

When the fired face of a brick pops off - spalling - the softer core underneath absorbs water even faster, and the damage accelerates. We cut out spalled and shattered brick individually, source replacement brick that matches the original in size, color, and hardness, and lay them in mortar matched to the existing wall. This matters in Arlington, where many chimneys were built with older, softer brick; setting hard modern brick and Portland-rich mortar into a soft old chimney concentrates stress and causes the surrounding original masonry to fail next.

4Firebox and Smoke Chamber Repair

Inside the fireplace, we repair cracked firebrick and deteriorated refractory mortar joints in the firebox, where temperatures demand materials rated for direct flame contact. Above it, we parge rough, corbelled smoke chambers with insulating refractory mortar to create the smooth, sealed funnel NFPA 211 calls for. An unparged smoke chamber leaks heat and combustion gases into the surrounding structure and catches creosote on every ledge. This is one of the most commonly flagged defects in older Massachusetts fireplaces, and one of the most important to correct.

5Damper and Cap Repair or Replacement

A rusted-open throat damper pours heated indoor air up the flue all winter; a rusted-shut one makes the fireplace unusable. We repair or replace throat dampers, and where the original is beyond saving we install top-sealing dampers that close the flue at the crown with a silicone gasket - tighter than any throat damper. We also repair or replace chimney caps, the stainless covers that keep rain, snow, squirrels, and nesting birds out of an open flue. A missing cap is the cheapest problem to fix and the most expensive to ignore.

6Flue Tile and Liner Repairs

Cracked or shifted clay flue tiles let heat and combustion gases reach the wood framing around the chimney, which is exactly the failure path in many chimney-related house fires. After a camera scan locates the damage, we advise honestly: isolated joint deterioration can sometimes be resurfaced, but cracked tiles typically call for relining with a UL-listed stainless steel liner sized to the appliance. We install insulated stainless systems for wood, oil, and gas flues, restoring a continuous, code-compliant path from appliance to chimney top.

How We Diagnose and Fix It

Professional chimney diagnosis follows a structure defined by NFPA 211, which recognizes three levels of inspection. A Level 1 inspection covers readily accessible portions of the chimney and is appropriate when nothing has changed and no problems are suspected — the standard annual checkup. A Level 2 inspection goes further: it adds accessible attics, basements, and crawl spaces, plus a video scan of the flue interior, and it is the prescribed level whenever a property is sold, a heating appliance changes, or an event like a chimney fire or severe storm may have caused damage. Level 3, rarely needed, involves opening up concealed areas of the structure. For the problem behind your search, a sweep will match the inspection level to the situation — and a symptom with an unknown cause generally justifies Level 2 scrutiny.

Not every chimney budget can absorb every recommended repair at once, and honest contractors plan for that. The triage logic is consistent: safety first, water second, cosmetics last. Anything involving flue integrity, carbon monoxide pathways, or fire risk gets addressed immediately — that category does not wait. Water-entry repairs come next, because postponing them is what turns moderate projects into rebuilds. Aesthetic work and efficiency upgrades can genuinely wait a season or two without penalty. A written, phased plan also protects you from a common failure mode: fixing items in the wrong order, like waterproofing masonry before repairing the crown that is letting water in above it. If chimney repair is part of a larger scope, ask where it falls in the sequence and what depends on it — a good sweep will have a clear answer.

Warning Signs to Watch For

  • White, chalky staining (efflorescence) on the brick, which means water is moving through the masonry and carrying salts to the surface.
  • Brick faces flaking, popping, or collecting as chips in the yard or on the roof - classic freeze-thaw spalling.
  • A ceiling or wall stain near the chimney that appears during wind-driven rain, the signature of failed flashing.
  • Cracks, gaps, or missing chunks visible in the crown when you look at the chimney top from the ground or a photo.
  • Crumbling or recessed mortar joints you can rake out with a fingertip.
  • Pieces of clay tile or gray flue debris landing in the fireplace or on the smoke shelf.
  • A damper that is rusted, hard to operate, or no longer seals - often a sign water has been entering from above.
  • A musty, campfire, or damp-masonry odor from the fireplace, especially in humid summer weather.
  • Smoke entering the room, or a fireplace that has become noticeably harder to start and keep drafting.
  • Rust streaks on the chimney exterior or on the firebox floor, meaning a cap, chase cover, or flashing component is corroding.

Why This Matters in Arlington

Arlington is dense with early-20th-century two-family homes, along with Victorians, colonials, and Philadelphia-style two-families built out between the 1890s and 1930s. Nearly all of this stock carries original brick chimneys, many serving multiple flues for separate units. A century of freeze-thaw cycles means crown cracks, spalling brick, and deteriorated mortar joints are everyday finds here.

Arlington Heights climbs some of the highest ground inside Route 128, and chimneys up on the hill catch more wind and weather than those near Spy Pond. Because so many homes are two-families, a single chimney often vents two households' heating systems, which raises the stakes on liner condition and regular inspection.

Nor'easters give chimneys in Arlington a beating that ordinary storms never match. These coastal systems drive rain and snow horizontally for hours at a time, forcing water against the sides of a chimney rather than politely down onto its cap. Wind-driven rain exploits every weakness: hairline cracks in the crown, thin spots in mortar joints, and lifted flashing at the roofline all become entry points under that kind of pressure. Homeowners often discover the aftermath weeks later, as a ceiling stain near the chimney or a damp, smoky odor in the firebox. After a hard nor'easter season, a careful inspection of the crown, flashing, and masonry is not paranoia; it is how storm damage gets caught while the fix is still small.

What It Typically Costs

Chimney repair pricing varies more than sweep pricing because chimneys fail in such different ways and places. The main drivers are extent, access, and materials. Repointing a few mortar joints is a different undertaking from rebuilding a chimney from the roofline up. Work high on a steep roof may require staging that a walk-up ranch never would. And in the older neighborhoods we serve, matching brick and mortar appropriately matters, both for appearance and because modern mortar that is harder than antique brick can actually accelerate damage to the original masonry. A written estimate after an actual inspection is the only number worth trusting, and it should itemize the work plainly enough to compare against any other bid.

Why Call Upside Down Chimney Sweeps

Good chimney work starts with good communication, and we structure every job around it. Before we begin, you get a clear scope and a clear price. During the visit, our technician explains what they are finding and photographs anything noteworthy inside the flue or up on the roof, places you would never see otherwise. Afterward, you receive a report that plainly states the condition of your chimney and any recommendations, ranked by urgency. Call our office and a person who knows your job answers, not a call center reading a script. None of this is revolutionary; it is simply how service companies used to operate, and we think Greater Boston homeowners deserve contractors who still work that way.

Frequently Asked Questions

How do I know if my chimney needs repair or if it can wait?
The honest answer is that you usually cannot tell from the ground, because the failures that matter most - crown cracks, flashing gaps, cracked flue tiles - are invisible from the yard. What you can trust are the secondary symptoms: staining, spalled brick chips, leaks during storms, flue debris in the firebox, or odors. Any one of those means water or combustion gases are going somewhere they should not, and waiting always increases the repair scope. The low-risk move is an inspection: we document the chimney's actual condition with photos, tell you what genuinely can wait, and put numbers on what cannot. Homeowners in Arlington are often relieved to learn the fix is smaller than they feared.
Why is my chimney leaking when the roof was just replaced?
This is one of the most common calls we get, and the answer is usually flashing. Roofing crews are excellent at shingles but frequently reuse old counter-flashing or rely on surface-mounted metal and caulk, which fails as soon as the sealant shrinks. Correct chimney flashing is a two-part system: step flashing woven into the shingle courses, covered by counter-flashing that is let into a groove cut in the mortar joints and lapped over the steps. Water crossing the joint always lands on metal. Beyond flashing, a cracked crown, porous brick, or a missing cap can each mimic a roof leak. We test methodically so you repair the actual entry point, not the loudest suspect.
What is spalling and why does it happen so much in Massachusetts?
Spalling is when the hard fired face of a brick breaks away, leaving the soft, sandy core exposed. The mechanism is freeze-thaw: brick absorbs water through its face and through open mortar joints, and when temperatures drop, that trapped water freezes and expands about nine percent, popping the face off from behind. Massachusetts is close to a worst-case climate for this - we routinely swing across the freezing line dozens of times each winter, and coastal towns add salt-laden air that accelerates the damage. Once a brick spalls, it absorbs water faster, so deterioration snowballs. We replace spalled brick, correct the moisture source, and often recommend a breathable water repellent to slow future absorption.
Can you just seal or waterproof the chimney instead of repairing it?
Sealing has a legitimate place, but only on sound masonry. A vapor-permeable siloxane water repellent slows how fast brick absorbs rain while still letting internal moisture escape - applied over open joints or a cracked crown, it merely hides the problem while water keeps entering through the defects. Worse, a non-breathable film sealer can trap moisture inside the wall and make freeze-thaw spalling dramatically worse. Our sequence is repair first, then protect: fix the crown, flashing, joints, and any damaged brick, then apply the repellent as insurance. If a company proposes spraying your chimney without repairing visible defects first, get a second opinion before you pay for it.
Are chimney repairs covered by homeowners insurance?
It depends on the cause, and the distinction matters. Sudden, accidental events - a chimney fire, a lightning strike, a tree limb brought down in a nor'easter - are commonly covered perils. Gradual deterioration from age, water intrusion, and freeze-thaw is treated as maintenance and typically is not covered. Where documentation helps is the gray area: a storm-damaged crown, or interior damage discovered after a specific event. We provide dated photos, written findings, and repair scopes that adjusters can actually use, and many clients in Arlington have used our inspection reports to support legitimate claims. We cannot promise coverage, but we can make sure your file is solid.
How long do chimney repairs take, and can they be done in winter?
Most single-issue repairs - a crown recast, flashing rebuild, damper replacement, or a course of brick replacement - are completed in one day. Larger combined scopes usually run two to three days. Winter work is possible but constrained: mortar and crown concrete need adequate temperatures to cure properly, so masonry work in freezing weather requires cold-weather methods, tenting, or sometimes a wait for a thaw window. Flashing repairs, caps, dampers, and liner work can proceed through most winter conditions. If you discover a problem in January, call (781) 653-5644 anyway - we can often stabilize the chimney immediately and schedule permanent masonry for the first suitable stretch of weather.
What is the difference between a Level 1 and Level 2 inspection?
NFPA 211 defines three inspection levels. A Level 1 is the annual check for a chimney in continuous service with no changes: readily accessible areas, verifying the flue is sound, clear, and appliance-appropriate. A Level 2 goes further and includes a video scan of the flue interior plus accessible attic, crawlspace, and roof areas - it is called for when property is sold or transferred, when an appliance or fuel type changes, or after an operating malfunction or external event like a chimney fire or severe storm. For repair diagnosis, Level 2 is often the right tool, because the camera finds cracked tiles and hidden defects that no flashlight ever will.
Why should I choose a local company for chimney repair?
Because the chimneys here are unlike chimneys almost anywhere else. Working out of Melrose, we spend every season inside the same housing stock you own - Victorians with soft lime mortar, triple-deckers with shared flues, 1950s capes converted from oil to gas - and we know exactly how these systems fail in this climate. That local pattern recognition means faster, more accurate diagnosis and repairs matched to the original materials rather than generic fixes. We are also twenty minutes away when something goes wrong, and our reputation in Arlington rides on every roof we touch. Storm-chasing outfits leave town; we drive past our work daily.

Get It Handled Today

Here is our closing pitch, such as it is: no pressure, just an honest look. Call Upside Down Chimney Sweeps at (781) 653-5644 and schedule an inspection for your Arlington home. We will examine the chimney from top to bottom, show you photographs of what we find, and give you a written assessment with a clear estimate for any recommended work. Then the decisions are yours, made on evidence, on your timeline, with no obligation beyond the visit itself. If you want a second opinion, we welcome the comparison; our documentation travels well. That is the whole offer. We think it is how chimney service ought to work, and we would be glad to prove it at your house.

Serving Arlington Same-Week

Our Melrose shop is 7 miles from Arlington. Call (781) 653-5644 for fast scheduling.

Call (781) 653-5644Email Us

Mon–Sat: 7:00 AM – 7:00 PM · Emergency service available